Crown Macrotech 12000i Macro-Tech iSeries MA12000i demo Like New Condition Free Shipping! Crown Quality! Start Price USD 3,250.00 Current Price USD 3,250.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, November 26, 2008 End Time Saturday, December 06, 2008 Location Stevens Point WI See more about 'Crown Macrotech 12000i Macro-Tech iSeries MA12000i demo' Description Demo Crown Macro-Tech i•Series 12000i Power Amplifier This unit was used very sparingly for demo purposes within the last few weeks only, was kept in excellent working and cosmetic condition, and is now available to you for an AMAZING price! Model MA-12000i Product Type Amplifier Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) ± 0.25 dB Signal to Noise Ratio below rated full-bandwidth power, A-weighted > 108 dB Total Harmonic Distortion (THD) at 1 watt into 8 ohms < 0.1% Total Harmonic Distortion (THD) Plus Noise at full rated power < 0.35%, 20 Hz to 20 kHz Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.35% Damping Factor (20 Hz to 100 Hz at 8 ohms) > 5000 Crosstalk (below rated power, 20 Hz to 1 kHz) > 80 dB Common Mode Rejection (CMR) (20 Hz to 1 kHz) > 55 dB, typically > 70 dB DC Output Offset (Shorted input) < ± 3 mV Power Output Guaranteed minimum power in watts at 20 Hz-20 kHz with 0.35% THD   2-ohm Dual (per ch.) 4-ohm Dual(per ch) 8-ohm Dual(per ch) 4-ohmBridge 8-ohmBridge 20 mSBURST 20 Hz - 20kHz 1 kHz MA-5000i 2,565W 1,800W 1,800W 2,000W 1,250W 3,600W 4,000W MA-9000i 4,570W 2,500W 2,500W 3,000W 1,500W 5,000W 6,000W MA-12000i 5,900W 3,500W 3,500W 4,000W 2,100W 7,000W 8,000W Model MA-12000i Product Type Amplifier Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) ± 0.25 dB Signal to Noise Ratio below rated full-bandwidth power, A-weighted > 108 dB Total Harmonic Distortion (THD) at 1 watt into 8 ohms < 0.1% Total Harmonic Distortion (THD) Plus Noise at full rated power < 0.35%, 20 Hz to 20 kHz Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.35% Damping Factor (20 Hz to 100 Hz at 8 ohms) > 5000 Crosstalk (below rated power, 20 Hz to 1 kHz) > 80 dB Common Mode Rejection (CMR) (20 Hz to 1 kHz) > 55 dB, typically > 70 dB DC Output Offset (Shorted input) < ± 3 mV Input Impedance (nominal) 10 kilohms balanced, 5 kilohms unbalanced Maximum Input Level +20 dBu typical Load Impedance (Note: Safe with all types of loads) Stereo: 1/2/4/8/16 ohms Bridge Mono: 2/4/8 ohms Input Sensitivity (referenced to 8 ohm rated output) 1.4V, 32 dB gain, and 26 dB gain Voltage Gain (referenced to 8 ohm rated output) 39.3 dB to 24.5 dB Required AC Mains Universal AC input, 100-240VAC , 50/60 Hz (±15%). Maximum AC mains voltage 264VAC AC Line Connector Five cordsets supplied with amplifier (USA, UK, European, Australia, India) Construction Specifications Cooling Dual-zone, microprocessor controlled, continuously variable speed fans, front-to-back airflow Front Panel Cast aluminum with integrated handles Protection Amplifier is protected against reactive loads, faults and shorts Weight 28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping Dimensions (W x H x D) 19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D      Place a Bid!